Detail CLAMP ON AC/ DC HiTESTER ( Hioki 3284)
Overview:
Analysis for DC to distorted waves
Analog output for current measuring level, current measuring waveform, or frequency measuring level.
The peak hold function displays the crest value of the inrush current occurring when electrical equipment is started
The AC+ DC mode enables measurement of the RMS value of full- or half-wave rectified waveformsÿ
Specifications:
DC Current 20.00/ 200.0 A, Basic accuracy: ± 1.3 % rdg. ± 3 dgt.
AC Current 20.00/ 200.0 A, ( 10 Hz to 2 kHz, True RMS) ,
Basic accuracy: ± 1.3 % rdg. ± 3 dgt.
DC Voltage 30.00 V to 600 V, 3 ranges, Basic accuracy: ± 1.0 % rdg. ± 3 dgt.
AC Voltage 30.00 V to 600 V, 3 ranges, Basic accuracy: ± 1.0 % rdg. ± 3 dgt. ( 10 to 1 kHz, True RMS)
Crest factor 2.5 and under ( 1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog output DC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz Band-width ( ± 3dB)
Resistance, Continuity check None
Frequency 1.00 Hz to 1000 Hz, Basic accuracy: ± 0.3 % rdg. ± 1 dgt.
Other function AC+ DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero
Display Display refresh rate: 4 times/ s ( at FAST) , 1 time/ 3s ( at SLOW) , 4 times/ s ( bar graph)
Power supply 6F22 ( Stacked manganese battery) × 1, Continuous use: 25 hours, or AC adapter 9445-02
Core jaw dia. Æ 33 mm ( 1.30 in)
Dimensions, mass 62 mm ( 2.44 in) W × 230 mm ( 9.06 in) H × 39 mm ( 1.54 in) D, 460 g ( 16.2 oz)
Supplied accessories TEST LEAD L9207-10 × 1, CARRYING CASE 9399 × 1, Hand strap × 1, 6F22 ( Stacked manganese battery) × 1, Instruction Manual × 1
Tampilkan Lebih Banyak